Steel sheet furniture

The steel sheet furniture is suitable for educational institutions, company buildings, banks, for storing various documents (books, maps, microfilms or other materials).

Construction

The parts are fabricated of steel-sheet in various typo-dimensions, with some of the parts being processed by milling and turning. They are subjected to phosphate treatment and power coating in different colors tones as required thus an aesthetically and long-lasting protection.

Assembling

• the furniture is installed by the beneficiary according to the version ordered;
• the beneficiary must protect the products during assembling/ utilization against mechanical damages (striking, scratching) or against unusual ambient conditions (excessive humidity, condensation, chemical or biologic corrosive agents, rooms flooding);
• the choice of the furniture shall be performed in compliance with the space available and the expected utility; the units are fastened by using fixing elements or they are fixed to the walls.

Components

1. Left right uprights
2. Shelves
3. Left/right lateral supports
4. Connection elements and fasteners
5. Assembly parts (screw, nuts, washers, collars)
6. Leveling feet (adjustable elements for obtaining the horizontally and the elevation level)
7. The frame with drawers is made up of:
   1. drawers frame
   2. leveling feet (adjustable elements for obtaining the horizontality and the elevation level)
   3. upper wall
   4. back wall
   5. side walls
   6. bottom plate
   7. sliding drawers

Operating conditions:

Simple or double shelf for books (fig.1)

1. Left right pillars
2. Shelves with back stoppers
3. Left right lateral supports
4. Connection and strengthen elements
5. Assembly components (screws, nuts, washers, collars)
6. Pedestals (controllable elements in order to achieve the horizontality and the elevation level).

Filing cabinet (fig.2)

1. Frame for filing cabinets;
2. Pedestals (controllable elements in order to achieve the horizontality and the elevation level);
3. Superior side;
4. Black side;
5. Lateral side;
6. Inferior side;
7. Filing cabinets with mobile sliders.

Shelf for maps (fig.3)

1. Double left right pillars;
2. Shelves with back-front stoppers;
3. Left right lateral supports;
4. Connection and strengthen elements;
5. Assembly components (screws, nuts, washers, collars);
6. Pedestals (controllable elements in order to achieve the horizontality and the elevation level).

Shelf for storehouse (fig.4)

1. Uprights left-rights;
2. Shelves;
3. Connectors and fasteners;
4. Assembling parts (screws, nuts, washers, collars).

Mobile cart (fig.5)

1. Welded frame;
2. Castors (with brake);
3. Handle made of plastic shrouded steel tube
4. End-parts (left-right);
5. Lateral holders (left-right);
6. Shelves with back stoppers;
7. Fasteners;
8. Assembling parts (screws, nuts, washers, collars).

Metallic locker (fig.6)

1. Lower side front;
2. Top cover;
3. Side walls;
4. Rear wall;
5. Shelves;
6. Separating walls;
7. Hinged doors with locks;
8. Feet;
9. Assembling parts (screws, nuts, washers, collars).

Locker with one, two or three doors

1. Bottom plate;
2. Side walls;
3. Inner side wall (for partitioning);
4. Cover plate;
5. Back wall;
6. Shelves;
7. Peg (as many as 3 in each compartment) and/or bar holders and/or coat hangers bar;
8. Door (with vent slots);
9. Feet.